Copier cd hack

You might be needed to do it several number of times, until you are getting no error message and the game runs! Chapter VII: Quick order list. Share this: Twitter Facebook. Like this: Like Loading Leave a Reply Cancel reply Enter your comment here Fill in your details below or click an icon to log in:. Email required Address never made public. Name required. Follow Following. Even though these cards are a lot more secure, once you know the encryption algorithm you can decrypt them and access the sensitive information.

With that, people can also clone these cards relatively easily. Since most Android smart phones running the Android OS have NFC on them, reading these cards and, in certain cases cloning them, is easy.

Hold on! Here's the easiest way to copy NFC cards to phone :. Although the BlackHat guide works well it can be a bit frustrating to use, since you have to get some components together and hack away at a guide for an hour or two to see some results.

Go to your settings and search for NFC, make sure to enable it. Now we can start cloning cards that have never changed their default sector password. The app comes with the default keys set by the manufacturer of NFC cards, you would not believe how many people never bother to change this.

The following images are from his guide, which can be found here. Once we have read the key or fob we want, we can store all of the information onto a file.

We can then use this information and write it back onto an empty card, essentially cloning the original or fob.

They provide an added level of security to the already existing Mifare Desfire NFC cards, making them incredibly secure. This model of copier usually has a print sever that you can set up in the Tools menu.

If you decide to gut it for parts and give the empty husk a Tibetan Sky Burial, you can run the toner cartridge dry printing out all of your favorite datasheets first.

Dig around the internal components — a lot of these type printers have a hard drive that store copies of everything scanned — look for confidential documents. It was throwing hard drive errors so I actually formatted it! I think it was empty anyway but interesting idea for sure. The question no one asked was did you try fresh paper and run it against the ply.

Damp paper or cheep paper will jam like that all day. I would start by cleaning the contact thermistor s in the fuser. Thanks for commenting! I was hoping I would run into someone with your experience.

I did use fresh paper but perhaps the copier was a tad moist inside from sitting outside for several days. This SP selects the number of pages made at this temperature. See Detailed Section Descriptions — Fusing for more details. This SP selects the length of time that this temperature is used. That is totally awesome, I cannot wait to see what you come up with. I love finding FREE tech that people just dump because it is old and not because it stops working. Some others already have suggested replacing the rubber rollers, and I second this.

I have a Samsung ML laser printer that I have been using since about After two graduate theses, many job applications and numerous other print jobs, the little rubber cam finger that grabs the paper from the tray had worn down. Very fine Emery paper is best for paper pick-up, paper separator, and pressure rollers especially in the fuser or just buy replacements.

They get glossed or glazed and the surface has to be roughed up so that they grip again. I saw a tetrahedral grinder that would make polished stone spheres made from four motors taken from photocopiers. The motors were preferred because of the low revolutions per minute they run well at.

So, sabotage a device to make money? Not sure, what the use, benefit or any other gain of your suggestion should be. Do you find it funny, to annoy people, you do not even know future users of the device?

I mean, the funniest part of a prank is watching the victims, which is not possible in your scenario. I scored a smaller desktop copy machine a couple years back.

Completely stripped it down to its guts. Managed to salvage a lot of great parts, including a bunch of stepper motors, linear rails, belts, gears, and spring hinges. You could likely make a 3D printer with the guts and have a lot of goodies left over. A Ricoh salesperson has been trying to sell the museum a new unit because Ricoh no longer makes replacement parts for the current unit. Many years ago brought a large copier home for my son age about 10 to dismantle, expecting it would take him a few days during school holidays, Unfortunately with access to a drill and driver attachment it only took him 2 hours — lots of parts for the parts box though.

Thanks for the heads up [RoGeorge]. I will be keeping an eye out for these and possibly other high end HP laser printers. This is a very pleasant surprise, thank you! I would put it to work once you get it to reliably boot up.

Check the power supply capacitors. Very helpful when photocopying large items or montages of collected items. Place it in a common area and collect the money. Lewin Day — You have a whole lot of good suggestions here. Your paper stock will not react well in humid conditions. Then under cut them severely. Tell your blokes to spread it word of mouth. Or just charge flat rates. To hold down paper jams do like the others told you.

Warm water after Emory cloth and drying is fine before replacement is needed. Also you will need a paper jam knife-like tool to clear paper dust and small fragments. I have heard that you can clean a cooled fuser roller with Fedron very strong solvent. But I have seen using folded paper, pencil eraser, or alcohol to clean them. Break them and you have a Ricoh service call. Try not to scratch the drum! I have seen copier techs use nail polish to fix drums but it leaves a white-space on the paper image.

Your error code is not severe. You can just clear that like you already have. Also just re-seat the connector, that may fix it. You can break the platen glass and get glass stuck in your arse! Emergency room at hospital? Then you have a much lighter and smaller footprint for moving. Then get a U-Haul trailer in Melbourne for long distances. If you want to do screenshots of your phone or tablet you will have to turn off or block the the halogen lamp.

But that will generate an error code if you unplug it or cause a fire if you block a live halogen lamp. The lamp is reflecting off of your phone screen so the reflected image is washed out.

Never operate the copier with the lid up. Not only does that generate more toner it can cause eye cataracts cook your eyes over time if you look at it too much. Extra toner in image can cause more paper jams too. When cleaning interior use a vacuum cleaner with a HEPA filter. You need an anti-static cleaning spray if you want the ADF to work correctly. Get a thin gooseneck hose for the vac to allow you to get into small spaces and not ding the drum.

One setting can affect other settings. So leave it to a professional if you want it to work correctly. Some things you can use a photocopier for: 1. Printed circuit board templates on transparencies.

Make make paper banners 8. Multiple letters or numbers per run. Then choose which character tile you need. Make direction arrows to point someone on a path in your house or flat. Make transparency overlays for TV, tablet, maps, etc.

Make a transparency sniper-like or periscope graticule cross-hair overlay. Marketing signs for your little porch-side copier business. Put little pull off tabs at bottom with your address and phone. Or scrap parts are great for photo-sensors, LEDs, powerful motors, belts, gears, glass, halogen lamps, HV assemblies, trimmer pots, electronic junk parts, wires, cables, etc. That sounds like a fun weekend thing to do. I currently have totala1. Originally Posted by Colonel Sanders.

Find More Posts by PlasmoidThunder. Originally Posted by Zippo. Originally Posted by PlasmoidThunder. It's purpose is for the installer and will have no effect in-game. Last edited by gamma; 6 Aug at PM. Reason: edit once instead of posting twice. OK, So for my final reply to this post, I installed everything as explained.

I then installed the 3. I then installed the new 3. I installed the Escalation Mod and all the Escalation maps. I fired it up and it is running excellent. Thank you all for the help! Game is badass and reminds me of the good old days. Doesn't require any CD and the music works great. Thanks for keeping this legendary game alive! It's still the best stradegy game out their in my opinion. Take care. Thread Tools. All times are GMT. The time is now AM.

All content, rights, and trademarks on this site are the property of their respective owners. NO CD hack? User Name. Remember Me?